Testing For The Correct Style of Lever Handle

The Door Release is unique to Private-Door and simplifies the automation of a door by eliminating the complicated and involved installation of an electric strike release. To confirm that the current door hardware is correct, perform the following test. If the handle does not work as described below replace it with door hardware listed below.

The following models require a lever style handle.

Private-Door Assistant
Private-Door System
Remote Release

Test Procedures

Step One: Stand on the inside, shut and lock the door. Make sure you have your keys with you.

Step Two: Open the door using the lever handle. If you have to unlock the door first, you need to replace the handle with one listed below.

Step Three: Go outside and shut the door.

Step Four: Check if the handle is secured. Unlock the door with the key and go inside.

The Door Release won't interfere with the normal operation of the door.

The Door Release will turn the door handle automatically.

Below is a suggested list of manufacturers and models of lever handles that will work with the Private-Door. Please confirm that the lockset you choose will function properly as described above.

Company

Model

Function

Schlage www.schlage. com

"Saturn" or "Jupiter"

Function "53" Storeroom

Sargent www.sargentlock. com

Line 7 Lever Style "LB" or "LL"

Entrance (05)

rc 5/6/04

Private-Door: A Necessity To Some, A Convenience To Others, Affordable To All.
"All content and graphics on this page are © Copyright 2000 by Tri-Cor International and may not be downloaded or reused for any purpose. All rights reserved. 5/31/05 v29.0